Drip Tape Loc Sleeve Hose Starter Fitting

The fitting you need to take Drip Tape directly off a hose fitting rather than poly tubing. Barbed end inserts into drip tape and secures in place by twisting the lock over the end of the tape.

Drip Tape must be used on low pressure (5-15 psi), achieved by installing a pressure regulator. Drip Tape needs to be on flat runs (no greater than 3% if sloped) and no longer than single runs of 450 feet. The more level the ground and the shorter the run, the more even and uniform the water flow.

⚠ Warning: This product or its packaging has a

CA Prop 65 Warning